Channel Reseller

Online Store

Check Out

Shopping Cart

800 619 9566

NEC Phone Systems  -  E System Sales, Inc.

   

E System Sales
Bizfon Phone Systems
Vodavi Phone Systems
Replacement Phones
Nortel Phone Systems
Computer Cash Register
Restaurant Management
Accept Credit Cards
Store Fixtures
Gondola Shelves
Voice Over IP
Panasonic KX-TD
Panasonic KX-TA
Camera Systems
Comdial DX-80
Computer Repair
Auto Repair
Phone Systems


Call Accounting


2 & 4 Line Phones


Big Button Phones

NEC DS1000/2000 Control Units

DS1000 Control Unit

The DS1000 (P/N 80200) comes pre-configured to operate three phone lines, eight digital stations, four analog (single line) stations, and one analog door box (P/N 92245). Equipped with external paging output, music-on-hold input and caller ID. With an additional 3 X 8 card (P/N 80221), the system operates up to six incoming lines, 16 digital stations, eight analog stations, and two analog door boxes.

This system can be purchased in kit form as follows:
Kit with DS1000 equipped 3 X 8 X 4 with three 22-Button Display speaker phones (P/N 80573).   Price is $749.
click here


DS1000 KSU


DS2000 4 Slot Control Unit

The 4-Slot KSU provides universal PCB slots and the system's power supply. Up to 48 ports, (up to 24 trunks and up to 40 extensions, maximum combined 48). System mounts on the wall and has a flip-off cover and removable side panel for easy access.

First slot requires a 16DSTU PCB (Part. Nr. 80021A). Cabinet accepts either A or non-A PCBs series power supply. DS2000 is subject to "Load factors". You can check your configuration to ensure you have enough power supplies.


4-Slot Cabinet


DS2000 8 Slot Control Unit

The DS2000 8-slot cabinet supports up to 8 universal PCBs and 3 system power supplies (depends on load factor requirements). Can operate up to 104 ports, (up to96 stations; up to 48 trunks). System mounts on the wall and has a flip-off cover and removable side panel for easy access. Translucent panel in the cover for getting essential system status and troubleshooting at a glance.

First slot must be a 16DSTU PCB (80021A).  Install only "A" series PCBs in the 8-slot cabinet.
Requires one power supply for each two 16DSTU PCBs (80021A), regardless load limits. Number of power supplies is dictated by load factor. Check load factor.  


8-Slot Cabinet

 

 

What Our Customers Say About Us.

34-button_super_display.gif (7640 bytes)
NEC System Phones

NEC_8Intramai.jpg (7324 bytes)
NEC Voice Mail


NEC Cordless

NEC Expansion Hardware
     

Contact Us


Music on Hold


EZ Installation


Installation Tools


Headsets


Door Phones


Battery Back Up


Cash Register


Polycom SoundStation Conference


Security Camera